Модул Преобразувател на честота в напрежение, Модул за преобразуване на Fv Модул Преобразувател на честота в напрежение от 0

Всичко за продукта

Features:

The converter module is to convert 0~500hz digital signal into 0~10V analog signal.:

The module can be used for interface conversion between PLC and frequency converter or matching control of interface between motion control card and frequency converter.:

Input pulse level of 5/12/24V can be directly input without resistance.But input signal frequency should maintain more than 0.5 seconds.:

All parts of the converter module are well-selected of good durability and high quality.:

The module is stable and has great performance while using.:

Specification:

Item Type:

Frequency to Voltage Converter Module

Size:

4.5 x 4.7 x 1.7cm / 1.77 x 1.85 x 0.67in

Relationship,Linearity:

50Hz to 1V:

250hz to 5V:

500hz to 10V:

Package List:

1 x Converter Module:

Note:

1. The multi-turn potentiometer on the board is used to calibrate the corresponding relationship between frequency and voltage.:

2. The input power supply voltage range is 12-30VDC. It is recommended that the power supply voltage be 15-24VDC. When the 12V level is used, the power supply cannot be powered by 12VDC. At least 15VDC power supply is required. If you need to use 12V power supply, you can also order 12VDC. Power converter.:

At 24 levels, the power supply needs to be powered by 24VDC:

3. The signal input end is isolated by diaphragm. Guaranteed :