Контролер SOFW F722DM, Жироскоп MPU6000 36s, Входно Напрежение, Черен Контролер за Дрона

Всичко за продукта

Item Type:

Controller

Weight:

Approx.27g / 1.0oz

Material:

Electronic Components

Color:

Black

Control Size:

Approx.31 x 30mm / 1.22 x 1.18in

Mounting Hole Spacing:

Approx.20 x 20mm / 0.8 x 0.8in

Bore Diameter:

Approx.4mm / 0.2in

Processing Device:

STM32F722RET6

Gyroscope:

MPU6000

BEC:

5V 3A; 9V 2.5A

Storage Device:

16MB

Input Voltage:

3-6S

Fixed:

Betaflight_4. 1.0 _MATEK722se

Uart Serial Port:

5pcs

Application:

Fit For FPV Traverser, Remote Control Aircraft, And For Drone

Package List:

1 x Control :

2 x Wiring :

4 x Damping Ring:

Note:

1. control has many integrated functions and components are very intensive. Please do not use tools (such as needle nose pliers or sleeve) to wring nuts during installation, which may easily scratch the flying tower hardware and cause unnecessary losses. The correct way is to tighten the nut with your finger and the screwdriver quickly tighten the screw from the bottom. (Remember not to be too tight, so as not to damage the PCB):

2. Propellers should not be installed during the installation and debugging of control, and tests should not be conducted indoors as far as possible to avoid accidents. Check the motor steering and propeller orientation again before installing the propeller for test . tip:

please do not fly near people. Our company will not be responsible for any loss caused by aircraft crash.

3. Do not use non original aluminum column or nylon column to avoid damage to the control hardware. The official standard is custom‑sized nylon column suitable for the flying tower.:

4. Before powering on the aircraft, please check again whether the installation between the flying tower connectors is correct (pins or wires must be aligned), check again whether the positive and negative poles of welding are correct, and check whether the motor screws are against the motor stator to avoid short circuit.:

5. Check whether there is :